801 2x16 Amp socket (002)

WCPT5000/200

Portable Tool Transformer, WCPT5000/200
2.5kVA continuously rated transformer, single phase, 230Vac Input – 110Vac Output.
UK manufactured, high quality portable safety transformer.
Manufactured to BSEN 61558 and fully compliant with reduced low voltage regulations.
Encased in a robust GRP enclosure, this high quality safety transformer is suited for harsh site conditions.
110V centre tapped to earth (CTE) secondary winding.
15amp thermal magnetic trip (hand resettable) reducing the chance of overload.
2 x 16A 110V Sockets.

Category:

Product Description

Portable Tool Transformer – WCPT5000/200

Description;

Manufactured to BSEN 61558.
Intermittent Rating: maximum rating for operating load at 25% duty cycle, i.e. 5 minutes on / 15 minutes off.
Thermal overload protection.
Glass reinforced polyester (GRP) case providing ingress protection to IP44.
Industrial output sockets to BSEN 60309 / IEC 60309 (Previously BS4343).
2 metre input mains lead with bare ends, for hard wiring or connector of choice (max current 23A).
i) If using the transformer up to it’s 2.5kVA continuous rating, supply current needed is 12A. Therefore fitting
a 13A UK domestic plug is permissible, alternatively 16A industrial plug.
ii) If using the transformer up to it’s 5.0kVA intermittent rating, supply current needed is 23A. Recommend 32A
size industrial plug (or other suitably rated plug), alternatively hard-wire direct to a fused spur electrical point.

Specifications;

Weight (kg): 32
Height (mm): 280
Depth (mm): 355
Width (mm): 315
Protection: 15A Push to Reset Thermal Breaker
Intermittent Tool Rating: 5.0kVA
Continuous Rating: 2.50kVA
Input Voltage: 230V
Output Voltages: 110V Centre tap earthed (55V-0-55V)
Output Sockets: 2 No. 16A